Bathroom renovations are one of the most thrilling decisions for the homeowner. Yet, when it comes to opting for bathroom renovations in Melbourne, there are a lot of choices to choose from. It is usual to make mistakes with various options and misleading information on the internet. Let’s talk about avoiding a few mistakes in a DIY bathroom renovation. From choosing the wrong type of tile to not planning enough, these are all common problems that can lead to frustration and eventual disaster. Looking at these tips, you’ll be able to ensure a successful bathroom renovation without any shocks.
If you’re considering a DIY bathroom renovation, it’s crucial to keep in mind the most common mistakes people make. Here are four to avoid:
Not planning enough ahead. Renovating bathrooms in Melbourne can be a big project. If you don’t have a plan, you’ll make mistakes while deciding on the renovation process. Make sure to get estimates from different bathroom renovation experts. So, you have an idea of the total cost, and you will be able to ensure that all your plans are aligned with your budget.
Not coordinating with bathroom remodelling specialists may pull you into a vulnerable situation. You may think doing everything by yourself will make your renovation project cheaper. But in reality, it can lead to complications and wasted time and money. If you need help with something specific, coordinate with your contractor skilled in home improvement to ensure everything runs smoothly. Make sure you fully understand potential problems as plumbing repairs or electrical updates, before proceeding with a bathroom renovation in Melbourne. There’s no shame in asking for advice from experts before starting any renovation project for your home- even if it delays your remodelling project a little bit.
Spending Much on Materials That Don’t Last Long
There are a few factors you need to consider while renovating your bathroom. You don’t want to waste your finances on materials that won’t last long. Here are the top five bathroom renovation mistakes to stay away from:
- Not Planning Budget
- Buying Cheap Materials
- Spending Too Much On Fixtures and Fittings
When renovating your bathroom, figure out what you need and create a budget based on that information. This will stop you from spending an excessive amount on items that are not required.
One of the biggest mistakes people make when renovating their bathrooms is buying cheap materials. Instead, put your money into qualitative products which can last for years.
Another common mistake people make is overspending on fixtures and fittings. Fixtures like showers and tubs can be expensive, but they’ll last longer if they’re quality products. Don’t forget about showerheads. They can be pricey yet tend to last longer.
Lack of Adequate Lighting
One of the excellent methods to improve your bathroom appearance is installing better lighting. Good lighting also enhances your bathroom’s appearance. However, many homeowners make renovations without taking adequate steps to ensure good lighting. Here are some common DIY bathroom lighting blunders to avoid:
- Not using enough light:
- Using outdated light bulbs:
- Failing to mount lights properly:
- Not considering safety:
One of the simplest things you can do to improve your bathroom’s lighting is to install a few more light fixtures. Not only will this increase the amount of illumination in the room, but it will also save you money on your energy bill.
Another common mistake is using old-generation light bulbs instead of purchasing new bulbs every time. Your old ones start giving off poor illumination. Invest in a good quality home light bulb conversion kit that will give you the correct wattage for each fixture.
One of the most common problems with improper bathroom lighting is light doesn’t always reach all areas in the room. Make sure to install ceiling and wall-mounted lamps correctly so that they shine down onto countertops and floors where people commonly stand or step while bathing or grooming themselves.
Before making any changes to your bathroom lighting, do not forget to consider safety concerns such as potential falls or accidents due to inadequate brightness. Always consult an expert if you have doubts about the best lighting options for your bathroom renovation project in Melbourne.
Lack of Storage
While planning to renovate your bathroom, you should consider quite a few things before starting. First, ensure you have enough storage space for all the products and equipment you’ll be using. Second, avoid making extensive modifications until you’ve consulted with a professional. Third, be sure to take measurements before starting work so that everything fits well when it’s done. Fourth, ensure all your electrical and plumbing fixtures can support the new configuration – if not, upgrade them now! Finally, confirm to plan plenty of time for the renovation.
Ignoring The Bathroom Exhaust
One of the prevalent mistakes in a DIY bathroom renovation to avoid is ignoring the bathroom exhaust fan. When the fan is not working, it can cause a build-up of harmful gases in the bathroom. These gases can include carbon dioxide, methane, and hydrogen sulphide. These gases can prompt health concerns if left unchecked and cause headaches, nausea, and dizziness. By installing a functioning bathroom exhaust fan, you can avoid these problems and make your renovation more enjoyable.
Hire JLT Renovations To Avoid Such Mistakes
When it comes to renovating your bathroom, it’s crucial to hire JLT Renovations as your bathroom renovation experts in Melbourne. Our highly skilled professionals can manage any size or type of renovation project. We also propose a 100% satisfaction assurance on our renovation job. With high-quality materials and products developed to last longer, we do not compromise on quality. Yet we feel proud as we provide exceptional customer service at competitive pricing.